Everyone should pay special attention to selecting qualified products when choosing wholesale of ferrule type pipe joints. Whether it is qualified or not depends on the maintenance atmosphere. The base metal and welding ring are not easy to be oxidized by air, which can ensure the fluidity, fusion and filling of the molten solder in the gap. .The brazed joint and the base metal are in the original color of the base metal after welding, which is not easy to be oxidized and blackened by air, and the welding quality is good inside and outside.
Because the base metal and welding materials are not easily oxidized by air in the whole process of the joint, the amount of flux can be greatly reduced. By comparison: using the new BRZ induction brazing process, the amount of flux used for the tee joint components is only about one-third of that of the basic induction brazing, which can greatly save the cost of flux and greatly improve or prevent the basic induction The flux residue after brazing process is a serious problem.
Qualified stainless steel pipe joints have a bright appearance after welding, and can clearly identify the base metal and brazing seam. The actual operator can easily detect mild defects such as blisters, air holes and cracks according to the human eye, reduce or prevent The faulty parts are injected into the customer's safety accident; after welding, there is no need to improve the process flow to solve the surface air oxidation and black layer, and the post-weld treatment process of the brazed joint can be cancelled to improve high efficiency, reduce staff and construction time, and reduce product costs. , reduce the production cycle. In addition, the general processing technology has strong applicability and low requirements for the quality of welding materials. The new technology and new process of BRZ induction brazing have no special requirements for flux and welding materials. The customer's current flux type and specifications are not adjusted, but they can also meet the requirements.